Make Something Big

Materials and software

  1. Fusion 360 Cad Model with 2D cam paths
  2. CNC mill - Cut actual blocks
  3. Plywood
  4. Nail Gun to secure wood to table
  5. Wood Glue
  6. Super Glue
  7. Super Glue Quick Dry Spray
  8. Duck Tape
  9. Human Test Subject

Fusion Work

  1. Brainstorm what I could potentiallly need in life
  2. I decided to make a perch like table so I can enjoy the view of Boston from my room
  3. Thought about the size of our plywood and what I needed so I pretty much used the entire sheet
  4. Once you finish your design you have to convert it to an arrangment and lay your piece flat on the sheet
  5. Then assign tool paths in the manufacturing section
  6. Make sure to download plug in to add dog bones to your design or else it will not fit together
arrangment
Place Pieces as an arrangement in fusion
table
Assembled Table hopefully

CNC Table

  1. Nail the wood to table in order to secure it
  2. Follow all ijnstructions on the CNC mill
  3. Vacuum when done
  4. Get board off of table using pry bar
  5. Make sure to move the board along the table to shear off any nails
pieces
Putting together pieces
machine
Starting to machine
cut
Extensive cleaning needed

Build Table

  1. Cut every tab off using a bandsaw or handsaw thing
  2. Sand down every connection
  3. This is where I realized that I never looked into tolerances for this type of material
  4. Fight with the pieces to get it together
  5. Super glue to hold it i place for when you wood glue and duck tape to have better joint connection
  6. Dry the table overnight
  7. Sit on top of table to test
    8. cutting
    Drying legs overnight
    Final
    Almost final product
Group project link Group Assignment